Physical address: 6296 Donnelly Plaza Ratkeville, Bahamas.
Troubleshoot And Repair Refrigerator Ice Maker
If your icemaker isn’t making ice the first thing you want to do is make sure it is switched on inside the door. Next make sure the water supply is turned on and flowing correctly. You can do this by disconnecting the waterline from the ice machine and checking the water flow out of the line. If the line flows freely continue troubleshooting but first unplug the refrigerator to cut the power off.
• Ice blockages in the freezing chamber: Large ice chunks get stuck inside preventing new ice from forming. This can also jam the arms that lift and release the ice cubes. Locate ice chunks blocking gears and reservoir channels where ice forms.
• Sometimes the waterline section that is inside the freezer can freeze solid and block water from reaching the ice maker. Thaw this waterline. This line if plastic can also get kinked blocking the flow of water.
• Check the ice maker settings and try resetting the ice maker by unplugging it for about 20 seconds then plug it back in and test.
Other Issues That Can Effect Your Ice Maker
A malfunctioning water supply inlet valve (if your refrigerator has one) will directly effect your refrigerator ice maker by failing to open and supply water. To check this valve operation you will need to locate it on your appliance and test it with a volt meter.
A bad thermostat can also cause problems for your ice maker since ice will only form over a specific temperature. To test a refrigerator thermostat, you can see if the thermostat turns the compressor on and off and verify that the temperature probes work by putting them in crushed ice.
If needed both of these parts can be ordered online. You will need the make and model number of the refrigerator.
Maintenance And Cleaning Your Refrigerator Ice Maker
Many professional repair technicians emphasize regular maintenance. Cleaning your icemaker on a regular basis will extend the life and improve the performance. Build up of minerals and dirt can have a negative effect on your ice maker. Regularly inspect and clean to keep your ice maker running smoothly.
If you ever need to replace your ice maker assembly depending on your skill level you can do-it-yourself. The cost for an ice maker the pump and lines is between $75-120.